|
Detailed Specifications:
What You Must Supply
You are responsible for providing a Decora-style cover-plate, which will also include the screws that secure it to the KP 1.
You are also responsible for providing a sufficient length of 24AWG, 8-conductor, CM- or CP-rated Category 3 or Category 5 UTP (unshielded twisted pair) wire and RJ-45 modular plugs. The wiring scheme must be Straight Through (standard T568B) and not crossed over as is done for telephone or data connections. The maximum length should not exceed 250 feet in order to avoid degradation of the signal. Further information on the correct wiring configuration is provided below.
Should you wish to use an optional IR sensor, we recommend using the Xantech 490 series Miniature Flush Mount IR Sensor which measures 3/4 in diameter by 2-3/8 deep.
This will control only Harman Kardon equipment when used with the HK PA4000 using the direct IR input only.
General
Mounting System: Compatible with most standard electrical junction boxes or use with a plaster ring.
Designed for use with user-supplied, Decora(R)-style cover-plate.
Connections: 8P8C RJ-45 Jack;
3-Pin Eurostyle Terminal Block
Wiring Protocols: RJ-45 modular jack 8P8C per TIA wiring specifications for T568B straight-through wiring using CM- or CP-rated Category 3 or 5 UTP, 8-pin, 8-conductor wiring, minimum 24AWG. For runs over 250 feet, thicker CL2/CL3, 4 pair, 22AWG wire may be required to preserve signal integrity. See owner's manual for further details.
3-pin output from optional IR sensor with conductors for Signal, Ground and +12 Volts
Recommended Third-Party Optional Infrared Sensor : Miniature Flush Mount IR Sensor , Xantech(R) Micro Link(TM) Model 490-00
Dimensions of Cutout for Third-Party Optional IR Sensor : 1/2 (12.7mm)
Dimensions
(H x W x D) : 4 x 1-5/8 x 1-9/16 (103mm x 41.2mm x 40.1mm)
Weight : 0.25 lb (0.11kg)
|