| |
Detailed Specifications:
Amplifier
# Channels: 7
Power (8ohms 20-20kHz 0.05%) /Ch: 140W
THX Certified: (Ultra2 Plus)
Continuous 6ohms Rated
Certified 4ohms performance
High Instantaneous Current Capability: 65A
Amplifier Frequency Response: 5Hz-100kHz
S/N Ratio (LINE IN): 110dB
All Discrete Circuitry
Absolute Ground Plate
Dual PUSH-PULL Design: Parallel
Independent Block Construction (Amp/Preprocessor)
Independent Power Supply: (3)
Optimum Gain Volume
Linear Optimum Gain Volume: Fine Linear (0.5dB step)
Non-Scaling Configuration
Bi-amp Capability For Front
BTL Capability For Front: (210W)
Processing
DOLBY Decoder: DD Plus, TrueHD
DTS Decoder: DTS-HD Master Audio
Neural Surround: (Neural THX)
THX Processing Mode
Music Optimizer
Audyssey Dynamic EQ
192K/24 Bit DACs: (Burr Brown)
VLSC: (ALL CH)
DSP Type / QTY: 32 BIT / 3
Adjustable Crossover: 40/50/60/70/80/90/100/120/150/200Hz
Independent Crossover
AV Sync: 250 ms
Accurate Speaker Distance Setting: (0.5ft step)
Multi-Band Speaker EQ: 7 Band
Connectivity
Audio I/O: 9 / 2
Phono Input
Digital Audio IN (OPT/COAX): 3 / 3
Digital Audio OUT (OPT/COAX): 1 / 0
Composite I/O: 6 / 1
S-Video I/O: 6 / 1
Front-Panel A/V: L / R / V / S / O
Component Video / Bandwidth: 3 / 2 / 100MHz
HDMI I/O: 4 / 2
HDMI Version: V1.3 Repeater
HDMI Deep Color Capable: (36bit)
Component Video Upconversion
Analog to HDMI Upconversion: (HQV Reon)
480i to 480p Processing: (HQV Reon)
1080p Upscaling: (HQV Reon)
Multi-Channel Input: 7.1
Surround Pre-Outs: 7.1
Speaker A/+B
Powered Zone2
Zone 2 Video Out
Zone 3 Line Out
iPod Ready: (DS-A2x)
Built-in HD Radio Tuner: Z
XM Radio Ready
SIRIUS Radio Ready
Integration Access
RS-232
IR Input
ONKYO-RI System Control
12V Trigger: (Zone2)
Miscellaneous
Pre-Pro/Learning Remote
Back-Lit Remote
Color-Coded Speaker Terminals
Auto Speaker Calibration W/Mic.: (Audyssey MultEQ XT)
OSD Out
Input Name Edit
Permanent Memory Storage
Solid Aluminum Front: (with door)
Detachable AC Cord
Warranty: 2 YEARS
Amplifier Section
Power Output
Front L/R
140 W + 140 W (8 ohms, 20 Hz–20 kHz, 0.05%, 2 channels driven, FTC)
160 W + 160 W (8 ohms, 1 kHz, 0.7%, 2 channels driven, FTC)
170 W + 170 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC)
Center
140 W + 140 W (8 ohms, 20 Hz–20 kHz, 0.05%, 2 channels driven, FTC)
160 W + 160 W (8 ohms, 1 kHz, 0.7%, 2 channels driven, FTC)
170 W + 170 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC)
Surround L/R
140 W + 140 W (8 ohms, 20 Hz–20 kHz, 0.05%, 2 channels driven, FTC)
160 W + 160 W (8 ohms, 1 kHz, 0.7%, 2 channels driven, FTC)
170 W + 170 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC)
Surround Back L/R
140 W + 140 W (8 ohms, 20 Hz–20 kHz, 0.05%, 2 channels driven, FTC)
160 W + 160 W (8 ohms, 1 kHz, 0.7%, 2 channels driven, FTC)
170 W + 170 W (6 ohms, 1 kHz, 0.1%, 2 channels driven, FTC)
Dynamic Power: 320 W (3 ohms, 1 ch), 270 W (4 ohms, 1 ch), 160 W (8 ohms, 1 ch)
THD (Total Harmonic Distortion): 0.05% (Rated power)
Damping Factor: 60 (Front, 1 kHz, 8 ohms)
Input Sensitivity and Impedance: 200 mV/47 k-ohms (Line), 2.5 mV/47 k-ohms (Phono MM)
Output Level and Impedance: 200 mV/470 ohms (Rec out)
Phono Overload: 70 mV (MM, 1 kHz, 0.5%)
Frequency Response: 5 Hz–100 kHz/+1 dB, -3 dB (Direct mode)
Tone Control: ±10 dB, 20 Hz (Bass), ±10 dB, 20 kHz (Treble)
Signal-to-Noise Ratio: 110 dB (Line, IHF-A)
Speaker Impedance: 4 ohms–16 ohms or 6 ohms–16 ohms
Video Section
Input Sensitivity/Output Level and Impedance
Video:
1 Vp-p/75 ohms (Component and S-Video Y)
0.7 Vp-p/75 ohms (Component PB/CB, PR/CR)
0.28 Vp-p/75 ohms (S-Video C)
1 Vp-p/75 ohms (Composite)
Component Video Frequency Response: 5 Hz–100 MHz (-3 dB)
Tuner Section
Tuning Frequency Range
FM: 87.5 MHz–107.9 MHz
AM: 530 kHz–1,710 kHz
FM/AM Preset Memory: 40 stations
General
Power Supply: AC 120 V, 60 Hz
Power Consumption: 9.5 A
Dimensions (W x H x D): 17 1/8" x 7 5/8" x 18 1/16"; (435 x 194 x 458.5 mm)
Weight: 50.9 lbs. (23.1 kg)
|